2025-01-31 コロンビア大学
Image credit: Emma Wawrzynek/MIT
<関連情報>
- https://www.engineering.columbia.edu/about/news/step-toward-fully-implantable-cochlear-implants
- https://iopscience.iop.org/article/10.1088/1361-6439/ad5c6d
UmboMic:PVDFカンチレバー・マイクロフォン The UmboMic: a PVDF cantilever microphone
Aaron J Yeiser, Emma F Wawrzynek, John Z Zhang, Lukas Graf, Christopher I McHugh, Ioannis Kymissis, Elizabeth S Olson, Jeffrey H Lang and Hideko Heidi Nakajima
Journal of Micromechanics and Microengineering Published: 18 July 2024
DOI:10.1088/1361-6439/ad5c6d
Abstract
Objective. We present the ‘UmboMic,’ a prototype piezoelectric cantilever microphone designed for future use with totally-implantable cochlear implants. Methods. The UmboMic sensor is made from polyvinylidene difluoride (PVDF) because of its low Young’s modulus and biocompatibility. The sensor is designed to fit in the middle ear and measure the motion of the underside of the eardrum at the umbo. To maximize its performance, we developed a low noise charge amplifier in tandem with the UmboMic sensor. This paper presents the performance of the UmboMic sensor and amplifier in fresh cadaveric human temporal bones. Results. When tested in human temporal bones, the UmboMic apparatus achieves an equivalent input noise of 32.3 dB SPL over the frequency range 100 Hz–7 kHz, good linearity, and a flat frequency response to within 10 dB from about 100 Hz–6 kHz. Conclusion. These results demonstrate the feasibility of a PVDF-based microphone when paired with a low-noise amplifier. The reported UmboMic apparatus is comparable in performance to a conventional hearing aid microphone. Significance. The proof-of-concept UmboMic apparatus is a promising step towards creating a totally-implantable cochlear implant. A completely internal system would enhance the quality of life of cochlear implant users.
